Tamborine Mountain Sports Complex - Sports Lighting Upgrade Project
Tender ID: 573465
Tender Details
Tender Description
The extent of works, for which construction is required for Tamborine Mountain Sport Centre - Sports Lighting Upgrade
Project
- Lighting upgrade to soccer and rugby league fields only
- Condition report on exiting 4 light towers (GM Poles)
- Supply and install 2 x new 25m GM poles & cross arms referenced as LP05 & LP06
- Supply and installation of 16 Sylvania Raptor SR2A 4000K 1200W Luminaires (refer to document No. 0250198-01_R1.AGI)
- Supply and Installation of new Distribution Board, luminaire drivers to be installed within this DB.
- Embankment to be retained to prevent erosion from jeopardizing structural integrity of new Distribution Board and associated footings
- Light switches to be housed within DB
- 3 x 10a 1P switched outlets + 1 x 32A 5P switched outlet to be installed within new DB with suitable cable entry for event power
- Multifunction Energy meter to be installed within DB
- Removal of old DB and install new Electrical pit to intersect existing conduits & cables
- Light tower No. 1 (closest to existing Electrical Distribution Board) requires soil pulled away from base and retainment to prevent build up in the future
- Baseplate grout is starting to crack and has not been installed as per pole manufacturers recommendation, suggest regrouting all 4 poles as per GM Poles grouting procedure (document attached)
- Weep holes to be installed through grout
- Light towers to be identified as per drawings with labels affixed to lower inspection covers
- New Electrical pit required near LP05, currently 100mm HD conduit turned up
- New Electrical pit required near LP04 to replace existing pit damaged beyond repair
- Concrete apron to be poured around all pits to protect edges from mower damage, suggest 150mm width
- Existing pits to be cleaned out - suggest vacuum excavation
- Existing luminaires and associated pole mounted control gear to be removed
- Suitable weatherproof terminal strip to be utilised within base of poles for all cable terminations
- New light fittings to be aligned as per lighting design and lux levels confirmed & documented on completion of works
- As constructed drawings & operation manuals to be handed over on completion of works Testing & Commissioning