Supply and Deliver to Warren, the following Pump & Engine Assemblies and Accessories:

Total number of pumps will be determined by the supplied pump flow rate. Total flow rate required is 1300l/s with 7m suction lift and 25m delivery head.

As an example:

- If the pump you are offering is capable of 26l/s, 1300 / 26 =50 pump units.

- If the pump you are offering is capable of 35 l/s, 1300 / 35 = 38 pump units.

Each Assembly to contain

PUMP:

• Trash Pump.
• Self-Priming.
• Minimum 100mm Suction & Discharge diameter.
• Minimum 7m Suction Lift.
• Minimum 20m Discharge Head; and
• Minimum flow 1500 Litres/Minute. Preferred flow 1800 litres/Minute. Maximum flow 2100 Litres/Minute.
• Female Camlok fitting on pump suction.
• Male Camlok fitting on pump discharge.
• No plastic Camlok fittings to be utilised. Aluminium, Bronze or Stainless Steel only.

Engine:

• 4 Stroke, air cooled diesel.
• Electric start, complete with fitted battery.
• Minimum 8 hours fuel capacity at 100% duty.
• DSE 3110 or approved equivalent, Engine Controller; and
• The Engine controller must start and stop the pump via a 2-wire float ball.

Hoses and Fittings:

• 6m Heavy-duty, UV Resistant, reinforced suction hose fitted with a one-piece Metalic suction strainer and Male Camlok.
• 2 x 10m Heavy duty, UV Resistant lay flat hose fitted with a Female and Male Camlok; and
• Hose clamps to be heavy duty Bolted SS.